English to Russian Tech/Engineering Electronics / Elect Eng 3D-projector components

Все тот же стереопроектор.
На картинке - деталь 48.
http://laviniya.ru/frontlampduct.jpg
Есть только текст про замену:
Integrator Assembly
The integrator assembly is mounted between the lamp compartment and the Illumination Optics
System.
WARNING
Wear Nitrile gloves provided, whenever handling the integrator.
1. Remove the front lid. See Front Lid on
page 7.
2. Remove the 2, 3mm hex screws securing
the mounting strap to the rear of the
integrator.
3. Wearing Nitrile gloves provided, carefully
remove the integrator.
When re-installing the integrator, repeat
instructions in reverse. Once installed, power
up the projector and adjust the integrator and
fold mirror for proper aperture alignment.