This question was closed without grading. Reason: Other
Feb 8 09:13
3 mos ago
36 viewers *
German term
Brückenhöhe
German to French
Tech/Engineering
Engineering: Industrial
Metrology
Bonjour,
Dans une brochure sur un microscope industriel (technologie confocale) :
Bei manchen Anwendungen ist ein direktes Positionieren
nicht gewünscht. Mit dem Parameter Brückenhöhe fährt die
Z-Achse zuerst den Messkopf um den angegeben Wert nach
oben und danach auf die in der Tabelle angegebene Position.
Merci pour votre aide.
Dans une brochure sur un microscope industriel (technologie confocale) :
Bei manchen Anwendungen ist ein direktes Positionieren
nicht gewünscht. Mit dem Parameter Brückenhöhe fährt die
Z-Achse zuerst den Messkopf um den angegeben Wert nach
oben und danach auf die in der Tabelle angegebene Position.
Merci pour votre aide.
Proposed translations
(French)
3 | hauteur du pont | liz askew |
2 | hauteur par rapport au pont de comparaison statique | Helene Carrasco-Nabih |
References
only finding | liz askew |
Proposed translations
2 hrs
hauteur par rapport au pont de comparaison statique
Pour certaines applications, un positionnement direct n'est pas souhaité. Avec le paramètre de la hauteur par rapport au pont de comparaison statique, l'axe Z déplace d'abord la tête de mesure en fonction de la valeur indiquée vers le haut, puis vers la position indiquée dans le tableau.
Je n'ai pas trouvé "hauteur de pont" dans https://www.ultra-forensictechnology.com/media/2758/visionx_...
Je n'ai pas trouvé "hauteur de pont" dans https://www.ultra-forensictechnology.com/media/2758/visionx_...
3 hrs
hauteur du pont
,,
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:48:13 GMT)
--------------------------------------------------
mais il faut le confirmer en cherchant d'autres sites francais
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:51:35 GMT)
--------------------------------------------------
https://theses.hal.science/tel-01321164/file/Younes-boukella...
pont supportant le microscope est posé sur une table antivibratoire, (3) le support du prisme et (4) la platine de déplacement micrométrique
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:53:11 GMT)
--------------------------------------------------
il existe peu de "hits"
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:48:13 GMT)
--------------------------------------------------
mais il faut le confirmer en cherchant d'autres sites francais
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:51:35 GMT)
--------------------------------------------------
https://theses.hal.science/tel-01321164/file/Younes-boukella...
pont supportant le microscope est posé sur une table antivibratoire, (3) le support du prisme et (4) la platine de déplacement micrométrique
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:53:11 GMT)
--------------------------------------------------
il existe peu de "hits"
Reference comments
3 hrs
Reference:
only finding
Je ne trouve pas votre terme en allemand dans le contexte cité
LK Metrology - CMM Measurement system - The Sempre Group
thesempregroup.com
https://www.thesempregroup.com › multi-sensing-cmms
The inventor and only manufacturer of premium CMMs in the UK – manufactured in Derby and trading since 1963. ****Bridge type, gantry and horizontal arm CMMs ****with ...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:24:12 GMT)
--------------------------------------------------
https://townbuzkop.files.wordpress.com/2019/03/coordinate-me...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:27:59 GMT)
--------------------------------------------------
I have actually found "bridge height" here!
https://www.steinmeyer-mechatronik.de/fileadmin/user_upload/...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:28:34 GMT)
--------------------------------------------------
Steinmeyer Mechatronik Fahrdrahtmessgeräte | Catenary Measuring Device FM4-LO
Fahrdrahtmessgerät | Catenary Measuring Device
FM4-LO
Welcome at Steinmeyer Mechatronik
For more than 140 years Steinmeyer Mechatronik (formerly known
as Feinmess Dresden) supplied high precision optical instruments.
With over 40 years of experience in railway technology we are the
leading supplier of catenary measuring devices.
Fast and precise measurement of the catenary position
With our catenary instruments, the position of the catenary for
electrical railways can be detected precisely. The static-punctual
measurement records the catenary height above the top of the rail
and the zig zag run in relation to the track center. Furthermore, our
system offers additional vertical distance measurements e.g. to
the catenary wire, to bridge heights or to crossing power lines. The
measuring instruments are used for catenary constructions, as well
as for maintenance work at overhead contact lines.
Willkommen bei Steinmeyer Mechatronik
Seit über 140 Jahren liefert Steinmeyer Mechatronik (ehemals
Feinmess Dresden) feinmechanisch-optische Geräte. Mit über
40 Jahren Erfahrungen in der Bahntechnik sind wir der führende
Anbieter für optische Lote und Fahrdrahtmessgeräte.
Schnelle und präzise Messung der Fahrdrahtlage
Mit unseren Fahrdrahtmessgeräten lässt sich präzise die Lage der
Fahrleitung von elektrischen Bahnen ermitteln. Die statisch-punk-
tuelle Messung erfasst die Fahrdrahthöhe über Schienenoberkante
(SOK) und die Fahrdrahtseitenlage zur Gleismitte. Gleichzeitig bietet
das System weitere vertikale Abstandsmessungen wie z. B. zum
Tragseil, zur Brückenhöhe oder zu kreuzenden Stromleitungen.
Einsatz finden die Messgeräte in der Fahrleitungsmontage, sowie
bei Regulierungs- und Instandhaltungsmaßnahmen an Oberlei-
tungsanlagen
but does it make sense in your context?
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:30:43 GMT)
--------------------------------------------------
I understood that this was supposed to be part of the microscope system itself.
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:32:02 GMT)
--------------------------------------------------
Why would an instrument for metrology be concerned about "bridge heights"?
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:37:48 GMT)
--------------------------------------------------
https://www.wasyresearch.com/coordinate-measuring-machine-cm...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:42:39 GMT)
--------------------------------------------------
https://www.renishaw.de/de/substrate-mastered-scale-on-a-cmm...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:43:54 GMT)
--------------------------------------------------
https://kmk-instrument.se/20.0.0.0/6994/ccd966bd7342e0ca3e50...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:44:49 GMT)
--------------------------------------------------
Gerätetyp: Multisensor-Koordinatenmessgerät in
Bauweise feste Brücke
Machine type: fixed bridge-type multisensor
coordinate measuring machine
Type de machine : Machine de contrôle portique
à pont fixe mulitisenso
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:46:44 GMT)
--------------------------------------------------
Abmessungen und Massen:
Messbereich:
X = 400–2000 mm
Y = 400–1350 mm
Z = 200–800 mm
Installationsbereich:
Tiefe: 1300–3400 mm
Breite: 1274–3100 mm
Höhe: 1940–3800 mm
Masse Messgerät: 1100/15000 kg
Werkstückmasse: mma x= 150 kg
(optional 300 kg)
Installation area:
Depth: 1300–3400 mm (51-134 in.)
Width: 1274–3100 mm (50–122 in.)
Height: 1940–3800 mm (76–150 in.)
Surface minimum pour l’installation :
Larg : 1300–3400 mm
Long : 1274–3100 mm
Haut : 1940–3800 mm
Finally!
So they ARE talking about the bridge of the system, not "bridges" we find along railway lines!
LK Metrology - CMM Measurement system - The Sempre Group
thesempregroup.com
https://www.thesempregroup.com › multi-sensing-cmms
The inventor and only manufacturer of premium CMMs in the UK – manufactured in Derby and trading since 1963. ****Bridge type, gantry and horizontal arm CMMs ****with ...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:24:12 GMT)
--------------------------------------------------
https://townbuzkop.files.wordpress.com/2019/03/coordinate-me...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:27:59 GMT)
--------------------------------------------------
I have actually found "bridge height" here!
https://www.steinmeyer-mechatronik.de/fileadmin/user_upload/...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:28:34 GMT)
--------------------------------------------------
Steinmeyer Mechatronik Fahrdrahtmessgeräte | Catenary Measuring Device FM4-LO
Fahrdrahtmessgerät | Catenary Measuring Device
FM4-LO
Welcome at Steinmeyer Mechatronik
For more than 140 years Steinmeyer Mechatronik (formerly known
as Feinmess Dresden) supplied high precision optical instruments.
With over 40 years of experience in railway technology we are the
leading supplier of catenary measuring devices.
Fast and precise measurement of the catenary position
With our catenary instruments, the position of the catenary for
electrical railways can be detected precisely. The static-punctual
measurement records the catenary height above the top of the rail
and the zig zag run in relation to the track center. Furthermore, our
system offers additional vertical distance measurements e.g. to
the catenary wire, to bridge heights or to crossing power lines. The
measuring instruments are used for catenary constructions, as well
as for maintenance work at overhead contact lines.
Willkommen bei Steinmeyer Mechatronik
Seit über 140 Jahren liefert Steinmeyer Mechatronik (ehemals
Feinmess Dresden) feinmechanisch-optische Geräte. Mit über
40 Jahren Erfahrungen in der Bahntechnik sind wir der führende
Anbieter für optische Lote und Fahrdrahtmessgeräte.
Schnelle und präzise Messung der Fahrdrahtlage
Mit unseren Fahrdrahtmessgeräten lässt sich präzise die Lage der
Fahrleitung von elektrischen Bahnen ermitteln. Die statisch-punk-
tuelle Messung erfasst die Fahrdrahthöhe über Schienenoberkante
(SOK) und die Fahrdrahtseitenlage zur Gleismitte. Gleichzeitig bietet
das System weitere vertikale Abstandsmessungen wie z. B. zum
Tragseil, zur Brückenhöhe oder zu kreuzenden Stromleitungen.
Einsatz finden die Messgeräte in der Fahrleitungsmontage, sowie
bei Regulierungs- und Instandhaltungsmaßnahmen an Oberlei-
tungsanlagen
but does it make sense in your context?
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:30:43 GMT)
--------------------------------------------------
I understood that this was supposed to be part of the microscope system itself.
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:32:02 GMT)
--------------------------------------------------
Why would an instrument for metrology be concerned about "bridge heights"?
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:37:48 GMT)
--------------------------------------------------
https://www.wasyresearch.com/coordinate-measuring-machine-cm...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:42:39 GMT)
--------------------------------------------------
https://www.renishaw.de/de/substrate-mastered-scale-on-a-cmm...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:43:54 GMT)
--------------------------------------------------
https://kmk-instrument.se/20.0.0.0/6994/ccd966bd7342e0ca3e50...
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:44:49 GMT)
--------------------------------------------------
Gerätetyp: Multisensor-Koordinatenmessgerät in
Bauweise feste Brücke
Machine type: fixed bridge-type multisensor
coordinate measuring machine
Type de machine : Machine de contrôle portique
à pont fixe mulitisenso
--------------------------------------------------
Note added at 3 horas (2024-02-08 12:46:44 GMT)
--------------------------------------------------
Abmessungen und Massen:
Messbereich:
X = 400–2000 mm
Y = 400–1350 mm
Z = 200–800 mm
Installationsbereich:
Tiefe: 1300–3400 mm
Breite: 1274–3100 mm
Höhe: 1940–3800 mm
Masse Messgerät: 1100/15000 kg
Werkstückmasse: mma x= 150 kg
(optional 300 kg)
Installation area:
Depth: 1300–3400 mm (51-134 in.)
Width: 1274–3100 mm (50–122 in.)
Height: 1940–3800 mm (76–150 in.)
Surface minimum pour l’installation :
Larg : 1300–3400 mm
Long : 1274–3100 mm
Haut : 1940–3800 mm
Finally!
So they ARE talking about the bridge of the system, not "bridges" we find along railway lines!
Discussion